Where can I find log-files?
For every new optimisation scenario a new folder is created inside the project folder.
Documents → Folder Name → Project Name → HxGN Emendate model -->Out-…
For every optimisation the following files can be found in this subfolder:
Geometry files for every iteration
Statistics for every iteration
Log-Files
Input Configuration File
Legacy Configuration File
Geometry Files
For every Iteration a ply-file is written for the three output geometries:
nominal_intersected_001.ply
print_smooth_001.ply
Statistics
For every iteration a csv-file (statistics_001.csv) is written.
The table includes deeper information about the FE-Analysis and design mass/volume of the iteration. Mass and volume values refer to the not intersected geometry and can differ from the final geometry.
Event_1_fem_memory | Event_1_fem iteration | Event_1_fem_error | Event_2_fem_memory | Event_2_fem iteration | Event_2_fem_error | Event_3_fem_memory |
---|---|---|---|---|---|---|
53502768 | 405 | 0.000276 | 53502768 | 819 | 0.00029 | 53502768 |
Event_3_fem iteration | Event_3_fem_error | optimization_achievement_index_envelope | design_mass | failure_criteria_max | stress_max | design_volume |
---|---|---|---|---|---|---|
400 | 0.000299 | -0.729102 | 7.484526 | 0.163968 | 6558739.18 | 0.000936 |
Log-Files
For the whole optimisation three Log-files are written:
GD_Engine.log
engine.log
manifest.json
The engine.log is a very detailed log with deeper information about the optimisation process in a chronological order and is used mainly for debugging purposes.
The GD_Engine.log is a reduced version of the engine.log to collect relevant data for the user. The log includes deeper information about the optimisation process in a chronological order.
All occurring Information (INF), Warnings (WRN) and Errors (ERR) are listed and further information regarding the software version, license usage, GPU/CPU calculation, number of used GPUs, base resolution and
size of the FE-Matrix.
The manifest.json file is just a listing of all files stored in the folder.
Configuration Files
The legacy configuration file includes the information for the optimisation as they were input by the preprocessing software. The input configuration file is also included. The file entails all initial information for the optimisation and is created automatically from the inputs of the legacy configuration file.
config-00-legacy.cfg
config-10-input.cfg