Non-Design Space Tool

The Non-Design Space Tool entails two methods to define Non-Design Spaces:

1. The Direct Method: Already existing cells can directly be selected as Non-Design Spaces.

   Open

   

   These cells can be created with geometry tools like Split Tool or with a Boolean merge operation if multiple solids already exist. When using the Boolean merge operation, the “merge solids as cells” option has to be activated in order to create the cells in one solid. These cells can then be selected as Non-Design Spaces with the Direct Method in the Non-Design Space Tool.

   Open

   

2. The Offset Method: Using a split method the Non-Design Space volume can be created with a defined offset value. This way an offset volume from a selected surface is created. The offset surface always cuts through the whole volume unless enclosing surfaces are selected.