Custom Tool - Import (Adams) Loads

1. Start the tool and click on the “choose file” button

2. In the now open window navigate to the load file you want to import. (Note: the file has to be exported in the Abaqus format, choosable during the export in Adams) An example of a load file in the Abaqus format is attached.

3. Click Apply: A dummy surface with the name “Load Collector” will be created and every load will be created as a remote load with the correct point of application and the surface as the target (since you can’t create a force without assigning it to a geometry)

4. Now you can go through the loads and simply assign them to the associated geometries

The video shows the execution of the tool:

Open

Example files:

Open