Outdated VERSION. Follow the link for the current version https://www.hexagonmi.com/MSC-Apex-Generative-Design/help

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Interface Tool - Non-Design Space & Machining Allowance Tool

The Interface Tool is replacing the two separate functions of the Non-Design Spaces and Machining Allowances Tool. The new workflow is to select the Design Space and then select the Interfaces. In the Interface Tool the values for the Interface Thickness (former Non-Design Offset method) and the Machining Allowances is entered. Further information regarding the Interface Tool here.

Retained Volumes

Retained Volumes are no longer part of the Smooth-Geometry. The parts are still considered in the optimisation but are not materialized in the result. However, the geometries can be visualized in the Post Processing via the Retained Volume Button in the bottom panel.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.
 

Copyright (C) 2021, MSC Software Corporation and its licensors. All rights reserved.