...
You can either create the geometry directly in MSC Apex Generative Design or import already existing files. You can import .xb, .step, and .sldprt files into the program.
Import/create the Design space including the Nondesign spaces in MSC Apex Generative Design 2020. For this Pedal the already prepared Design space and Nondesign spaces were imported.
The CAD-file includes several solids. Thus, only one solid is supported for an optimisation, with a Boolean operation the solids can be merged to one. Activate Merge Solids as Cells to create partitions which can be used for Nondesign spaces.
...
Create the material Steel in the Materials editor and assign it to the Design space
The specific values needed are the Young's Modulus (210e3 MPa), Poisson ratio (0.28) and density (7.85e-6 kg/mm3)
...
Nondesign spaceshave to be selected using the optimisation Tools. In this case with the direct method all already existing cells (partitions) can be selected
...
The Nondesign spaces will change the colour and are listed in the model tree
...
Go to the Loads & Boundary Condition Tool to enter the loads and fixations. Displacements, Forces, Moments, Gravity and Pressure Loads can be applied using different selection options.
In this case a symmetrical optimisation using the Advanced User Settings is carried out. Therefore, the loads are only applied on a half (quarter/eighth…)
The loads will be automatically mirrored through the symmetry planes
Attention: The loads are only allowed to be applied in the positive coordinate direction. More information about how to use the symmetry function here.
In this case only one force is defined in the positive coordinate half (on the top plate):
Name | Force/Moment/Pressure/Gravity | Direction | Value in N |
|---|---|---|---|
Force-Moment1 | Force | y | -1000 |
...
One constraint is created and attached on the inner surface of the cylinder:
Name | Direction |
|---|---|
Constraint 1 | x, y, z (=0) |
...
Step 4: Definition of load cases
The next steps are defined in the Studies area.
All boundary conditions must be assigned to specific load cases, which are defined as Events. The number of Events can be changed by adding/deleting Events to the Meshless Generative Design Scenario. The assignment of the boundary conditions to the Events can be made in the Loads & Constrains Window. The already created loads and constraints that concern the Design space are listed in this window and can be activated for each Event individually.
Active in Event1: Force-Moment and Constraint1
...
The optimisation parameters are selected in the Studies Area as well.
Select the Strut Density: Medium
Select the Shape Quality: Balanced
Enter the Stress Goal: 50 MPa
Advanced User Settings: BF1584446026. Further information here.
...
Step 6: Adding Advanced User Settings (Symmetry)
...
The choice between local or remote and GPU or CPU solving can be made. Furthermore, the complexity value can be changed.
...
If all data is correct, the optimisation can be started and tracked in the Post Processing. The Analysis Readiness function checks if all information are provided and the optimisation can start.
...
The optimisation is finished after 64 iterations (Shape Quality: Balanced).
Step 8: Visualization of Stresses & Displacements
...
You can always change the Strut Density, Stress Goal and Complexity to influence the results and try out different options
The Complexity can be increased to realize a higher resolution (increases calculation time!) Options - Application Settings - Generative Design Solver
The whole MSC Apex Generative Design project with all results can be downloaded here:
| View file | ||
|---|---|---|
|