Update Links
In this section you find information about occurring warnings and errors. As we are continuously gathering information on how/when warnings and errors occur and under which circumstances this site will constantly be updated with new information.
Please contact the respective support for your application:
Please contact the MSC Apex Support if a warning or error occurs which is not yet listed here or cannot be averted by applying the compiled help:
W255de448
Found … voxels outside of valid design space … removed them.
Optimization run continues.
Please contact MSC Apex Support.
W244ff728
Cannot map voxel …
The loads and boundary conditions could not be mapped to the voxel model and might not be considered in the optimisation anymore. LBCs should always be applied to Non-Design Spaces. These ensure a correct consideration of the LBCs during the optimisation.
W6f682328
Cannot copy output file. … does not exist as regular file
This might occur while performing a Command Line optimisation. While the SwitchAddRemove (schedule.iterations.OutputDuplicateInErode.outputMode, schedule.iterations.OutputDuplicateInGrow.outputMode) option is active only every second iteration is visible as an result. In this case the iteration could not be copied but the optimisation will continue. To remedy this situation delete the output folder and start the optimisation anew.
W73209b30
Copying output file … would override …
This might occur while performing a Command Line optimisation. While the SwitchAddRemove (schedule.iterations.OutputDuplicateInErode.outputMode, schedule.iterations.OutputDuplicateInGrow.outputMode) option is active only every second iteration is visible as an result. In this case the iteration could not be copied but the optimisation will continue. To remedy this situation delete the output folder and start the optimisation anew.
W7c691a00
Unable to copy output file …
This might occur while performing a Command Line optimisation. While the SwitchAddRemove (schedule.iterations.OutputDuplicateInErode.outputMode, schedule.iterations.OutputDuplicateInGrow.outputMode) option is active only every second iteration is visible as an result. In this case the iteration could not be copied but the optimisation will continue. To remedy this situation delete the output folder and start the optimisation anew.
W6df456e8
Carve intersection is disabled. The fallback intersection method will take place instead.
We8bf37f1
Remeshing failed, mesh was not changed. The optimisation will continue without creating a remesh.
W1511c540
Sewing resolution … exceeds rasterization resolution … adjusting threshold from … to …
The model is very big (galactic size) and cannot be imported in the software. Check you unit system and dimensions.
W6bef1a88
Low memory, reducing preallocation amount … attempts left.
Memory storage is checked. If not enough memory is available, less memory storage is checked. If there isn’t enough memory storage available to do the allocation an Error (Eb20f3210) will be occur.
W644693f8
Time estimation has become inconsistent, expect inaccuracies.
W36faacc8
Error detecting available memory / low available memory … GB
There are two possible reasons for this warning:
The available memory cannot be detected because of the operating system.
There isn’t even enough memory available to let the optimisation start.
Make sure that there is more memory available or reduce the complexity.
W4ebe0a20
… Projected memory requirement exceeds available memory - complexity … is too high. Theoretical limit: complexity … recommended: …
This is a feasibility check regarding the input complexity value. The chosen complexity value is too high to be calculated on this machine. A certain maximum complexity value is recommended.
W4ff53240
… Optimization will likely run out of memory - available … GB, projected need … absolute maximum … recommended maximum …
This is a feasibility check regarding the input complexity value. The chosen complexity value is too high to be calculated on this machine. A certain maximum complexity value is recommended.
W76bd49a8
Unable to compute centroid for geometry … using bounding box center instead
A “corrupt” STL/PLY file was supplied for a Mask named in the warning text. Depending on other mask settings (whether the surface is to be used / filled), different centroids / centers of gravity are computed. This warning indicates all those attempts have failed and instead the bounding box center is used.
This can happen if the input has degenerate triangles or is not a closed surface. Please check the input files or replace these if possible.
W2e4e8b88
boundary condition is dislodged - no active elements …
A boundary condition was disconnected. A reconnect and other connection strategies were unsuccessful. Please check you model set up and make some adjustments for a feasible model.
W33559448
License feature(s) have become invalid, checking out again in … seconds.
They will be checked out again in … seconds.
W5b09c550
event … has no connected boundary conditions.
The Event … has no connected boundary conditions. The Event will be ignored from now on.
W5b820290
geometry … is not used by anything
The geometry … is not used by anything in the configuration file and will not be considered in the optimisation.
W244ee728
coordinate system … is not used by anything
The defined coordinate system … is not used by anything in the configuration file and will not be considered in the optimisation.
W41d43530
Missing density for space … setting to …
The density is set to the value listed in the warning message.
W74060730
fullPivHouseholderQr failed, attempting next solver
Different methods for solving FE equation systems are being used. This one did not work so continuing to the next method.
W760bf120
colPivHouseholderQr failed, attempting next solver
Different methods for solving FE equation systems are being used. This one did not work so continuing to the next method.
W777a0bc8
completeOrthogonalDecomposition failed, attempting next solver
Different methods for solving FE equation systems are being used. This one did not work so continuing to the next method.
W041b3b18
CG failed
Different methods for solving FE equation systems are being used. This one did not work so continuing to the next method.
W6c825a00
Material is not valid. Condition 1 failed for Isotropic material …
W6c825a01
Material is not valid. Condition 2 failed for Isotropic material …
W79aa1a40
Fractured Design Space - make sure the model consists of only a single, connected body.
W3532b020
Unrecognized config file version …
W07975548
The given config was written for a version prior to …
The optimisation will continue but might not recognize all the input parameter. Have a look at other Warning messages for further information.
W0d19d338
The given config was written for a version newer than …
E7f716c48
This Error is only produced after another Error was encountered. The optimisation algorithm tried to continue despite the previous Error but could not continue. The optimisation fails with this Error although the primary Error is the reason for the terminated optimisation.
E4ebe0a20
Projected memory requirement exceeds available memory - complexity … (detail …) is too high. Theoretical limit: complexity … (detail …), recommended: complexity … (detail …)
The chosen complexity value is too high to be calculated on this machine. A certain maximum complexity value is recommended.
Eb20f3415
boundary condition is missing elements
A Non-Design Space was removed and the applied boundary conditions are not considered.
The Design Space has lost the connection to the force/constraint application point. The model is no longer complete and it doesn’t make sense to continue with the optimisation.
Increase the Complexity.
Licensing Warnings
W22b64ce2
Connection to license server failed. Reason …
Please make sure your license is valid and active.
W22b64ce3
Attempting reconnect to license server
The connection to the license server was lost. Please make sure your license is valid and active.
W338e291e
Cannot drop allocated license …
The connection to the license server is lost. Error