In this section you find information about occurring warnings and errors. As we are still gathering information on how/when warnings and errors occur and under which circumstances this site will constantly be updated with new information.
You can find Warning & Error codes displayed in the Studies tab by double klicking on the Meshless Generative Design Status or in the log files in the result folder in your workspace (log_error.log & log_warning.log).
Information regarding the “Analysis Readiness” checks can be found here.
Warning/Error Code | Description | Explanation & Action Steps |
|---|---|---|
Wf9ae851b Wf9b42fd9 | “Probable reduction of the model is more than …% of the starting model.” | This is just a notification that the predicted reduction of the model is very high. Further information here. |
We924da72 | “The current solution may differ greatly from the expected due to large nondesign areas, please try the Advanced User Settings: BF1584446026” | If the Nondesign spaces are a large part of the whole Design space, please add BF1584446026 to the Advanced User Settings. |
E8b7af774 (former W8b7af774) | “The Mask … was removed.” The design space has lost the connection to a Non design space on which no boundary conditions are applied. | |
Ec3b1ac29 | “No fixed knots found.” The design space has lost the connection to one or more of the fixation(s). The model is no longer fixated and it doesn’t make sense to continue with the optimization. | |
E8bb13ecb | “The … was removed and the applied boundary constraints are not considered” The design space has lost the connection to the force/constraint application point. The model is no longer complete and it doesn’t make sense to continue with the optimization. |
Please contact us if a warning or error occurs which is not yet listed here or cannot be averted by applying the compiled help.