Export files
The following output files can be selected and are saved in the optimization folder.
| Export command | File name | Description |
|---|---|---|
| export_stl_name_MC_Smooth | buildSpace_MC_MainData_Loop_1 buildSpace_MC_MainData_finished | Result geometry |
| export_stl_name_MC_Smooth_intersection | buildSpace_intersection_Loop_1 buildSpace_intersection_Loop_... buildSpace_intersection_finished | The optimization result is intersected with the design space in each iteration on a voxel basis. |
| export_all_allCases | Each defined export will be exported per loadcase | |
| Stresses | ||
| export_ply_name_Stress_RGB | Stresses: ply in color | |
| export_ply_name_Stress | Stresses: ply values for nodes | |
| export_mrc_name_Stress | Stresses: mrc values for nodes | |
| export_ply_name_Stress_Prop | Stresses: ply values for facets | |
| Displacements | ||
| export_ply_name_Dis_RGB | Displacements: ply in colour | |
| export_ply_name_Dis | Displacements: ply values for nodes | |
| export_ply_name_Dis_Prop | Displacements: ply values for facets | |
Log files
configDate&Time | If the config file is changed during an optimization, new changed config file is written as soon as it is considered in the optimization. |
| csv_Boundary_Dis_case_Lastfall_1_1 | Displacements per element in load case 1 |
| csv_Boundary_Load_case_Lastfall_1_1 | Load per element in load case 1 |
| csv_Knots_Boundary_Dis_case_Lastfall_1_1 | Displacements per node in load case 1 |
| csv_Knots_Boundary_Load_case_Lastfall_1_1 | Load per node in load case 1 |
| FunctionOptimizerLog | Table with minimal stress, maximum stress, median stress, volume, volume prognosis target stress, volume prognosis 90% target stress, volume prognosis 80% target stress, volume prognosis 70% target stress, volume prognosis 60% target stress, volume prognosis 50% target stress, volume prognosis 40% target stress, volume prognosis 30% target stress, volume prognosis target stress minus 20%, volume prognosis target stress minus 10%, |
| log_error | Error messages |
| log_export | Export time for the result files |
| log_FEM | |
| log_loadConfig | Calculated detail when deteil = auto |
| log_loadSpace | Import of the stl files in increasing priority |
| log_loop | Runtime for each iteration and the whole optimization |
| log_MC_Parser | |
| log_warning | Warning messages |
| numOfIteration | Overall number of iterations |
| analyseAtAllTimes | Creates the files Analysis.log and Analysis.csv in each iteration (also sets the maximum diplacement and stress für ply export). |
Add Comment