The optimisation falls back to CPU calculation because of a number of different reasons:

• There isn’t a GPU license available

  • For GPU calculation a separate license is required and needs to be purchased.

  • All GPU licenses are in use for other optimisations

• The GPU Service is not installed.

  • Have a look at your computers Services and check for “MSC Apex GD GPU Solver Engine 2021 (port …)”

  • If you cannot find it - please install the Service manually:

    1. Open a command window

    2. Navigate to C:\Program Files\MSC.Software\MSC Apex Generative Design\2021-772889\leaf\Services\AEM\WIN8664\bin

    3. Execute install_mgd_gpu_solver.cmd -p (42001) -i (Computers IP-Address)

       1. For port the default in MSC Apex Generative Design is: -p (42001)

       2. You can find out your IP- Address in windows by opening a command window and using the command ipconfig -all.

    4. Check in the computers Services again and see if the Service is installed and running

• The GPU Service is not active (no active network interface).

  • Have a look at your computers Services and check if “MSC Apex GD GPU Solver Engine 2021 (port …)” is running.

  • If it is not running, start it.

• There isn’t enough GPU memory available, the model is too big.

  • Adjust the model or the complexity of the model and start again.