Two kinds of geometries can be defined in MSC Apex Generative Design Configuration File - spaces and masks.
The main difference between these two types of geometry definition is that only the Design Space is categorized as a space. A space get the additional information regarding the material of the geometry. Whereas masks are just marking areas in the part such as Non-Design Spaces, Constraints, Forces etc. by adding attributes explained below. For every creation of a Non-Design Space or other boundary condition a new Mask is being created. However, if you simultaneously select multiple cells in the Non-Design Space Tool and then create the Non-Design Space all cells are saved in just one Mask. This creation and handling of the Masks is very important for the Keep Non-Design Spaces Function.
Example: Generative Design - Bookshelf
The Bookshelf is a beginner tutorial with just a few Non-Design Spaces and Boundary conditions thus it is a great example to explain have a look at the different geometries. It has one Design Space, four Non-Design Spaces, one Mask representing the force application area and three Masks representing the fixation application area. The Space and Masks are marked in the picture below.
The input in the Configuration File looks as follows:
#=================Geometry=====================================
Design Part
Space Bookshelf
.path = Bookshelf
.material = 316L
.E-Modul = 192372000000.000000
.Poisson = 0.300000
.density = 7.970000e+03
Non-Design Regions
Mask Non_Design_Region_1
.path = Non_Design_Region_1
Mask.Non_Design_Region_1.nonDesign
Mask.Non_Design_Region_1.preserve
Mask Non_Design_Region_2
.path = Non_Design_Region_2
Mask.Non_Design_Region_2.nonDesign
Mask.Non_Design_Region_2.preserve
Mask Non_Design_Region_3
.path = Non_Design_Region_3
Mask.Non_Design_Region_3.nonDesign
Mask.Non_Design_Region_3.preserve
Mask Non_Design_Region_4
.path = Non_Design_Region_4
Mask.Non_Design_Region_4.nonDesign
Mask.Non_Design_Region_4.preserve
Load application regions
Mask Force_-Moment_1
.path = Force-Moment_1
Mask.Force-Moment_1.nonDesign
Mask.Force-_Moment_1.preserve
Constraint application regions
Mask Constraint_1
.path = Constraint_1
Mask.Constraint_1.nonDesign
Mask.Constraint_1.preserve
Mask Constraint_2
.path = Constraint_2
Mask.Constraint_2.nonDesign
Mask.Constraint_2.preserve
Mask Constraint_3
.path = Constraint_3
Mask.Constraint_3.nonDesign
Mask.Constraint_3.preserve
#==============================================================
Although the Non-Design Space at the top and the Force Application is the same geometry, separate masks are created for each new condition.
0 Comments