Export files
The following output files can be selected and are saved in the optimization folder.
| Export command | File name | Description |
|---|---|---|
| export_stl_name_MC_Smooth | buildSpace_MC_MainData_Loop_1 buildSpace_MC_MainData_finished | Result geometry |
| export_stl_name_MC_Smooth_intersection | buildSpace_intersection_Loop_1 buildSpace_intersection_Loop_... buildSpace_intersection_finished | The optimization result is intersected with the design space in each iteration on a voxel basis. |
| export_all_allCases | Each defined export will be exported per loadcase | |
| Stresses | ||
| export_ply_name_Stress_RGB | Stresses: ply in color | |
| export_ply_name_Stress | Stresses: ply values for nodes | |
| export_mrc_name_Stress | Stresses: mrc values for nodes | |
| export_ply_name_Stress_Prop | Stresses: ply values for facets | |
| Displacements | ||
| export_ply_name_Dis_RGB | Displacements: ply in colour | |
| export_ply_name_Dis | Displacements: ply values for nodes | |
| export_ply_name_Dis_Prop | Displacements: ply values for facets | |
Log files
configDate&Time | If the config file is changed during an optimization, new changed config file is written as soon as it is considered in the optimization. |
| csv_Boundary_Dis_case_Lastfall_1_1 | |
| csv_Boundary_Load_case_Lastfall_1_1 | |
| csv_Knots_Boundary_Dis_case_Lastfall_1_1 | |
| csv_Knots_Boundary_Load_case_Lastfall_1_1 | |
| FunctionOptimizerLog | |
| log_error | |
| log_export | |
| log_FEM | |
| log_loadConfig | |
| log_loadSpace | |
| log_loop | |
| log_MC_Parser | |
| log_warning | |
| analyseAtAllTimes | Creates the files Analysis.log and Analysis.csv in each iteration (also sets the maximum diplacement and stress für ply export). |
Add Comment