Generative designed models can be reanalyzed with Apex or Nastran. Apex Generative Design is a design generator and not a high precisly FE-Analysis Tool, thus we recommend for critical parts the reanalysis with a verified solver.
The final generative designed part can be exported directly inside the postprocessing as a STL-file. We recommend binary STL-files.
The exported STL-file can be imported back into the same Apex Generative Design project. Please check your Geometry Import/Export settings. A Feature and Vertex angle of 40 degrees is a good value and should be default.
To verify the generative designed part an intersection is needed. Further information about the intersection here. The intersected part can be exported as a Parasolid file (.x_b or .x_t).
The exported Parasolid-file can be imported to Apex 2020 or Apex Jaguar. Sometimes the imported solid has some manifold faces which must be deleted. By hovering over the part they are visible. With the Geometry Tools - Add/Remove Vertex the unnessesary edges can be deleted (right mouse button - delete on the green edge).
The cleaned part can be meshed with tet-elements. Usually the generative designs are very complex and need a lot of elements for a good approximation.
The Boundary conditons can be applied on the intersected surfaces and a FE-Reanalysis can be done.
A Tutorial for a FE-Reanalysis coming soon!