...
Relevant data for this tutorial:
| View file | ||
|---|---|---|
|
Step 1: Start MSC Apex Generative Design
...
The program starts and you can directly create your optimisation model
...
You can either create the geometry directly in MSC Apex Generative Design or import already existing files. You can import .xb, .step, and .sldprt files into the program.
Import/create the Design SpaceHow we understand Geometryincluding theHow we understand GeometryNon-Design SpacesHow we understand Geometryin MSC Apex Generative Design. For this Pedal the already prepared Design Space and Non-Design Spaces were imported.
The CAD-file includes several solids. Thus, only one solid is supported for an optimisation, with a Boolean operation the solids can be merged to one. Activate Merge Solids as Cells to create partitions which can be used for Non-Design Spaces.
Open the Design Space Tool in the Optimization Tools to select the imported Geometry as the Design Space. Activate the Symmetric Design Constraint and select the YZ plane to set up the symmetric optimisation.
Non-Design Spaces have to be selected using the Non-Design Spaces Tools. In this case all already existing cells (partitions) can be selected
Machining Allowances should be applied to every functional surface. Adjacent Faces should be selected at once, to create one coherent Machining Allowance. Therefore the automatic execution mode can be turned off.
In this case a value of 1 mm was chosen. How much Machining Allowance is necessary, depends on the dimensions of the part and the manufacturing process/machine.
For the next steps, the Non-Design Spaces as well as the Machining Allowances are hidden.
Create the material Steel in the Materials editor and assign it to the Design Space
The specific values needed are the Young's Modulus (192372 MPa), Poisson ratio (0.3) and Density (7.97e-6 kg/mm3)
...
Go to the Loads & Boundary Condition Tool to enter the loads and fixations. Displacements, Forces, Moments, Gravity and Pressure Loads can be applied using different selection options.
In this case only one force is defined on the contact plate with the foot:
Name | Force/Moment/Pressure/Gravity | Direction | Value in N |
|---|---|---|---|
Force-Moment1 | Force | y | -1000 |
...
One constraint is created and attached on the inner surface of the cylinder:
Name | Direction |
|---|---|
Constraint 1 | x, y, z (=0) |
...
Step 4: Definition of Events (load cases)
The next steps are defined in the Studies area.
All boundary conditions must be assigned to specific load cases, which are defined as Events. The number of Events can be changed by adding/deleting Eventsto the GD Scenario. The assignment of the boundary conditions to the Eventscan be made in the Loads & Constrains Window. The already created loads and constraints that concern the Design Space are listed in this window and can be activated for each Eventindividually.
Active in Event1: Force-Moment 1 and Constraint1
...
The optimisation parameters are selected in the Studies AreaStudy, Scenario & Eventas well.
Select the Strut Density: Medium
Select the Shape Quality: Balanced
Set the Complexity Setting: 10
Enter the Stress Goal: 50 MPa
...
Don’t forget to save the project!
...
If all data is correct, the optimisation can be started and tracked in the Post Processing. The Analysis Readiness function checks if all information is provided and the optimisation can start.
...
The optimisation is finished after 64 iterations (Shape Quality: Balanced).
Generative Design
You can always change the Strut Density, Stress Goal and Complexityto influence the results and try out different options
The Complexitycan be increased for a higher resolution and more detailed result (increased calculation time!)
The Strut Densityinfluences the structures which are formed during optimisation
...
The mass of each iteration can be visualized with a diagram
...
The whole MSC Apex Generative Design project with all results can be downloaded here:
...