Event specific stress constraints Specific Stress Goals realize the setup of different optimization optimisation targets for each Event (load case). The following stress goal Stress Goal settings are possible:
An overall stress goal Stress Goal can be set for the optimizationoptimisation,
for every event Event a specific stress constraint can be set,
or just one (two, …) event specific stress constraints Event Specific Stress Goal(s) can be set and the other events Events consider the overall stress goalStress Goal.
This way different prioritizations of events Events can be realized e.g. to integrate overload events Events which should not be taken into considerations such as the normal loads.
...
The left image shows the starting point of this example. The part is loaded with two events Events that have the same stress goals Stress Goals and the same forces. In the second image, the stress target of one event Event is halved and the forces are doubled. Because of this change one half of the structure is considerably thicker as the other side of the structure - because higher forces and a considerably lower stress goal Stress Goal is applied. The third image shows the result when in one event the forces as well as the stresses are doubled. As expected, this has no influence on the structure and it is the same structure as in the first one. The duplication of both the forces and the stress cancel each other out.
...