This is a composition from different material data sheets and only suggestions for material properties. MSC Apex Generative Design needs the density, youngs modulus Young's Modulus and the poisson Poisson ratio as an input.
Import database into MSC Apex Generative Design
...
Name | Additive Manufacturing process | Density [kg/m^3] | Youngs modulus [MPa] | Poisson ratio* | Yield strength [MPa] | Tensile strength [MPa] | Source |
|---|---|---|---|---|---|---|---|
PA12 | Selective Laser Sintering (SLS) | 900 | 1700 | 0.39 |
| 45 | EOS Data Sheet |
PP | Selective Laser Sintering (SLS) | 895 | 1200 | 0.43 |
| 27 | EOS Data Sheet |
Alumide | Selective Laser Sintering (SLS) | 1360 | 3800 | 0.4 |
| 48 | EOS Data Sheet |
PLA | Fused Deposition Modeling (FDM) | 1010 | 3039-2539 | 0.43 | 45-26 | 48-26 | Stratasys Data Sheet |
ABS | Fused Deposition Modeling (FDM) | 1050 | 1627 | 0.35 |
| 22 | Materialise Data Sheet |
Ultem 9085 | Fused Deposition Modeling (FDM) | 1340 | 2220 | 0.35 |
| 72 | Materialise Data Sheet |
PA12 | Multi Jet Fusion (MJF) | 1010 | 1700 | 0.38 |
| 48 | Materialise Data Sheet |
EPX82 | Digital Light Synthesis (DLS) | 1155 | 2800 | 0.4 |
| 82 | Carbon Data Sheet |
CE221 | Digital Light Synthesis (DLS) | 1210 | 3870 | 0.42 |
| 92 | Carbon Data Sheet |
*values aren't from the listed source but are wihtout without a specific one. Please check the material data at your hand to find the suited value for your specific material.
...