...
To influence the Strut Density even further, changes of the number of iterations, stress goal percentage and number of resolution levels can be made. These settings overwrite parts of the selection of the Strut DensityStrut Densityand the Shape Quality. The table gives an overview of the default settings:
...
To set up these additional parameters, the Input Commands (left side of the table) need to be added to the optimisation model in the Advanced User Settings Text Field. In the picture below an example is shown. By adding these Advanced User Settings, the first (coarse) resolution level will be skipped and the optimisation starts directly at the second level.
...
Restart (Start Space)
With the Advanced User Settings a Restart is possible. A Start Space needs to be chosen with which the optimisation will re/start.
...
45° | schedule.prefabricated.wallAngle=45° |
Maximum Thickness (Experimental Function)
Maximum thickness of a wall, strut or rib and in general all other resulting shapes. Specified in world units.
...
configuration.maxThickness= 2
| Info |
|---|
Currently, this is an experimental function in an early development status. It cannot be ensured to always hit the maximum thickness target or not to exceed the stress target. |
Minimum Thickness (Experimental Function)
Minimum thickness of a wall, strut or rib and in general all other resulting shapes. Specified in world units.