Update when Drupal is updated
The following Analysis Readiness offenses offences apply to Generative Design Scenarios:
Design Part Category
...
Offences
Invalid Design Part:
The design part requires a single solid body for the solver. Empty parts, non-solid bodies, or multiple solid bodies cannot be analyzedanalysed. This is an Unready offenseoffence. To remedy this situation, modify the part to make sure it has a single solid body using Boolean operations for example.
Missing Design
...
Space:
The solid or cell(s) within the design part are defined as nonNon-design regionsDesign Spaces, so no design region Design Space is available in the solver. This is an Unready offenseoffence. To remedy this situation, make sure that there is a design region Design Space in the design part.
Non-Existing Design Part:
There is not a design part associated to the study. It cannot be analyzed analysed without a design part. This is an Unready offenseoffence. To remedy this situation, define a design part and associate it to the study.
Missing Material Assignment:
No material has been assigned to the design part. Without a proper material specification for the design part, it cannot be analyzedanalysed. This is an Unready offenseoffence. To remedy this situation, assign a material to the design part.
Missing Material Property:
A material is assigned to the design part which is missing critically required material property data values. This is an Unready offenseoffence. To remedy this situation, make sure that Young's Modulus (E), Poisson's ratio, and Density are specified for the design part's material.
Environment Category
...
Offences
Missing Constraints
This offense offence exists when no constraints are contained within the current context. A static analysis of this model will fail due to mechanisms.
This is an Unready offenseoffence. If the source is constraints not applied, apply a set of constraints which will hold the structure in all three degrees of freedom and prevent a failure of the solver due to mechanisms. If the source is constraint association missing from scenario, edit the scenario so that at least one constraint is associated.
Missing Loads
This offense offence exists when critically required loads are lacking within the current environment.
This is an Unready offenseoffence. If the source is no loads applied, no loads exist in the current loading environment. Include one to remedy the offenseoffence. If the source is load association missing from scenario, edit the scenario so that at least one load is associated.
Suspect Load Definition
A load is present within the environment which is defined in such a way that may not yield the intended result.
This is a Suspect offenseoffence. If the source is zero magnitude static load, this static load has a magnitude of zero. It will not provide any energy input to the system.
Invalid Load Definition
A load is present within the environment which is not fully or validly specified.
This is an Unready offenseoffence. If the source is undefined load, this load is applied to the system, but its definition is not adequate for solver submission. Complete the definition or change to a different definition to remedy this offenseoffence.
Simulation Category
...
Offences
Undefined Stress Goal:
The stress goal is not defined in the current scenario and the solver cannot proceed. This is an Unready offenseoffence. To remedy this offenseoffence, specify a value for the stress goal in the generative design scenario.
More information regarding Warnings & Error here.