A
B
C
D
...
Design space:
...
Detail: Kantenlänge der FEM-Elemente auf der höchsten Auflösungsstufe.
Displacement: Vorgeschriebene Verschiebung, z.B. um Lagerungen abzubilden.
E
...
Space in which material may be or which may be change and redistributed during optimization
Detail: Edge length of the FEM elements at the highest resolution level
Displacement: Prescribed displacement, e.g. to map fixations
E
Estimate: Estimation of target volume and stress in a few minutes/iterations
F
Filigree: Designtype setting
Flächenlast:
...
Functional Surfaces: All surfaces that experience a force or fixation and/or represent connection points to other obejcts
G
H
I
J
K
...
L
Lastfall: Alle Kräfte und Lagerungen
M
Manufacture:
Massive:
Material: Jedem Objekt wird ein Material zugewiesen mit E-Modul und Poissonzahl.
Materialbereich: Vereinigung vom Designspace und den Nondesignbereichen
Moment: Moment
N
Nondesignspace: Die Bereiche, in denen zwingend Material vorhanden sein muss.
Normal:
O
Optimierungsrestriktion:
Optimize:
P
Q
R
Randbedingung:
RBE2-Element:
RBE3-Element:
S
Symmetrie:
Startspace: Optimierung startet mit dem angegebenen Objekt als Grundobjekt.
Stress: Optimierungsziel, maximal erlaubte Spannung.
T
...
Load Case: Defined loads and fixations are combined into load cases
M
Machining allowance: Allowance for post-processing steps of the optimization results on the functional surfaces
Manufacture: Optimization with very good printable surface quality
Massive: Designtype setting
Material: Each object is assigned a material with the material data Young's Modulus and Poisson's ratio
Material space: Union of the designspace and the nondesignspaces
N
Nondesign space: Spaces, which must contain material and which are not changed during the optimization
Normal: Designtype setting
O
Object: Geometry element, e.g. surface, volume etc.
Optimize: Execution of an optimization
P
Q
R
S
Symmetry: Calculation of symmetrical components around the coordinate origin
Startspace: Optimization starts with a specified object as the base object
Stress: Optimization target, maximum permitted stress
T
Topology Optimization: Iterative process in which an optimum material distribution is achieved in the designspace under specified boundary conditions.
U
V
Voidspace:
...
Spaces in which no material is allowed