Update Links, Projects & Pictures ( ? )
The Advanced User Settings give the possibility to (re-)start an optimisation with a Start Space. With this option already optimised results can be modified, e.g. struts can be added or removed, and this new geometry can be used as the starting point of the optimisation. With this Two-Stage-Optimisation already optimised geometries can be highly influenced and steered in the desired direction.
In the following the final result of a previous tutorial will be modified and a Two-Stage-Optimisation will be performed. In this case an additional strut will be added.
Step 1:
...
Transfer of the already existing geometry
The first step is to export transfer an already existing geometry. The result from the following optimisation was used in this case:
| View file | ||
|---|---|---|
|
The last iteration is selected and exportedtransferred to the Pre Processing with the Transfer Design Candidate Shape to pre-processing button.
...
In general, every previous iteration can serve as a Start Space and can be exported.
Step 2
...
:
...
The imported geometry is displayed in your model tree as a new part as a faceted solid.
...
Creation of an additional strut
With the Sketching and Geometry Tools inside MSC Apex Generative Design an additional strut can be created. First, two planes are placed where the strut is to begin and end. These planes are created with the Sketching Tool by sketching a rectangle on one of the global planes. The Transform Tool enables the user to place the planes on the desired positions.
...
Second, the beginning and ending of the new strut are created on the datum planes. Therefore, two circles are sketched on these planes. The circles should be created in the same part as the already existing geometry so that the new strut has direct contact to the previous geometry.
...
The results are two circular surfaces which can be connected to one strut by using the Surface Loft Tool. For this the picking filter on the left side of the tool has to be set to Edges. The result is one strut which is displayed as a solid inside the model tree.
...
Step
...
3: Creation of the Start Space
To create the new Start Space the just created strut and the imported optimised shape can be merged with a Boolean Operation.
...
The resulting faceted solid needs to be exported as an STL-file.
Attention: The unit has to be in meters!
...
Step
...
4: Start of the optimisation with the modified Start Space
In the last step the optimisation can be (re-)started with the new, modified Start Space. Therefore, the previous Scenario can be copied.
...
In this case ten iterations on the last Resolution Level are entered. How to adjust the number of iterations for each Resolution Level is explained here.
...
The optimisation starts with the modified geometry as the first iteration. At the end of the optimisation the strut is integrated completely into the design. Because the new strut is now loaded with stresses other areas of the geometry are less loaded. The optimisation reduces the material accordingly at these areas, thus in most cases the new, modified design is as lightweight as the previous one.
...
| View file | ||
|---|---|---|
|