...
There are two ways to realize a FE-Reanalysis. One based on the created STL-file and another by creating a NURBS-Geometry (Retransition). For both methods an intersection has to be done to create functional sharp edges and surfaces on which the boundary conditions can be applied. Either This is done automatically during the optimisation for the STL-file (Nominal-Geometry) or manually with MSC Apex Generative Design . Since major improvements regarding speed and robustness for the Retransiton and the following intersection, the NURBS-Geometry workflow is recommended.
...
NURBS-Geometry Workflow
Create a NURBS-Geometry with the Facet Body to NURBS Geometry Tool. We recommend using a non-intersected geometry for this. Therefore, the smooth geometry Smooth-Geometry can be exported from the Post Processing.
Boolean Intersection between the retransitioned NURBS-Geometry and Design Space either in MSC Apex Generative Design or MSC Apex. A tutorial how to perform a retransition here.
Import the NURBS CAD-file to MSC Apex.
Remesh the geometry with a solid mesh (Tet-elements).
Apply the boundary conditions
Make sure that the applied boundary conditions are the same as in the optimisation (Loads are applied as RBE3 elements and fixations as RBE2 elements).
STL-file Workflow
Export a design candidate from the Post Processing.
Make sure the intersected geometry (Nominal-Geometry) is used. Otherwise, a manual intersection needs to take place in MSC Apex Generative Design or MSC Apex.
Import the intersected STL-file into MSC Apex as a mesh.Use the Geometry-from-Mesh tool to create a faceted body.Delete the imported surface mesh
Activate the “Detect Machined Faces” option.
Remesh the geometry with a solid mesh (Tet-elements).
Apply the boundary conditions:
Make sure that the applied boundary conditions are the same as in the optimisation (Loads are applied similar as RBE3 elements and fixations as RBE2 elements).