Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

Goal of this tutorial

  • Get familiar with the symmetry function

...

Image Added

Training:

Relevant data for this tutorial:

...

  • Import/create the Design Space including the Non-Design Spaces in MSC Apex Generative Design. For this Pedal the already prepared Design Space and Non-Design Spaces were imported.

  • The CAD-file includes several solids. The file Pedal_body_1 is used to split the upper surface of the pedal to create the area for the load application point. Therefore, open the Split Surface Tool in the Geometry Edit Tools and select the top left surface as the split surface. Now select all curves that separate the surface as in the picture below.

  • Open the Design Space Tool in the Optimization Tools to select the imported Geometry as the Design Space. Activate the Symmetric Design Constraint and select the XZ plane to set up the symmetric optimisation.

    The other solid of the pedal Pedal_body_1 is no longer needed and can be hidden or even deleted.

  • Create the material Steel in the Materials editor and assign it to the Design Space. In this case the material behaviour is Isotropic.

  • The specific values needed are the Young's Modulus (192372 MPa), Poisson ratio (0.3) and Density (7.97e-6 kg/mm3).

  • The Tension Strength is the maximum allowable stress for the material and is set to 320 MPa.

...

The whole MSC Apex Generative Design project with all results can be downloaded here: Coming Soon!

View file
namePedal_2022-1.7z

You might also be interested in these tutorials:

...