...
Otherwise, reduce the Complexity of your optimisation model (Study Tab).
W175a5d37
Unable to meet requested detail level. Minimum level: …
...
Please contact the MSC Apex Support.
E8b7af774
...
We131b33c
Only … GB free memory.
The system has not enough free memory (RAM) to create the FE-Matrix.
We109f304
A complexity of … (detail: …) is too high, and also a complexity of … (detail: …) would certainly be too high to pass the first iteration. A complexity of … (detail: …) is recommended.
The chosen complexity value is too high to be calculated on this machine. A certain maximum complexity value is recommended.
Ee109f304
We109f304 is handled as an error
The warning We109f304 causes a stop of the calculation.
Sometimes, this error can prevent an optimisation with a Start Space on the highest resolution level although the optimisation would be possible. Add disable.error.Ee109f304 to the Advanced User Settings to ingnore it.
E8b7af774
The Mask … was removed.”
The Design Space has lost the connection to a Non-Design Space on which no boundary conditions are applied (former W8b7af774).
Tearing off of Non-Design Spaces
E86b9657
“Start Start space volume is magnitudes bigger than design space. You might want to check start space scaling”scaling.
The Start Space STL-file is in a wrong unit system.
Only the SI-Unit system is supported for a Restart.
Ec3b1ac29
“No No fixed knots found.”
The Design Space has lost the connection to one or more of the fixation(s). The model is no longer fixated and it doesn’t make sense to continue with the optimisation.Tearing off of Non-Design Spaces
E8bb13ecb
“The The … was removed and the applied boundary constraints are not considered”considered
The Design Space has lost the connection to the force/constraint application point. The model is no longer complete and it doesn’t make sense to continue with the optimisation.Tearing off of Non-Design Spaces
In case you are using the symmetry option, have a look at your model setup. The forces and constraints must be applied on the part of the model in the direction of the positive coordinate system.
...