| Info |
|---|
Goal of this tutorial
|
...
Training:
Relevant data for this tutorial:
...
In this case one force is defined (on the top plate):
Name | Force/Moment/Pressure/Gravity | Direction | Value in N |
|---|---|---|---|
Force - Moment 1 | Force on cell | z | -1000 |
...
Three constraints for the three fixations are created and attached to the inner surfaces of the three cylinders:
Name | Direction |
|---|---|
Constraint 1 | x, y, z (=0) |
Constraint 2 | x, y, z (=0) |
Constraint 3 | x, y, z (=0) |
...
Step 4: Interface Creation
...
All result iterations are displayed as soon as they are available. Furthermore, you are able to stop the optimisation in this selection area. However, a Restart is not directly possible.
...
Inside the Post-Processing the von Mises stress and the displacements are visible for all iterations and for every Event
The Scale can be influenced individually
The mass of each iteration can be visualized with a diagram
...
You can go back to the model setup by clicking the Exit button in the right bottom corner.
...
| View file | ||
|---|---|---|
|
You might also be interested in these tutorials:
...