...
One part can be uploaded to the project (nominal or print geometry) and each new upload to an existing project replaces the old geometry.
The material values can be changed in MSC Apex Generative Design in order to fill missing material information. The changes in MSC Apex GD are not synchronized with the Nexus project and therefore not considered by the other products.
The imported build direction from the Nexus document is not set to referenced Principal Coordinate System and used for defining the build direction. Please set the PCS as the active principal coordinate system and create a new scenario.
When importing the build direction from two different document subsequently to the same Apex GD project, the name of the PCSs might be the same.
Due to a localization problem, the KPIs for volume and mass might not be visible in the Nexus document. Set your computer language to English to see the uploaded values. The geometry is uploaded either way and is confirmed with the green tick.
The status bar message during the upload of a geometry to Nexus might be incorrect. When the upload is completed successfully the following message will appear: Upload to nexus completed successfully.
...