...
- Choose the design type normal
- Enter the optimization goal stress: 60 MPa
- Set the symmetry setting: Z-Axis. The Z-Axis symmetry constraint is used to span a plane along the x- and y-axes in the coordinate origin.
- Open
...
- Result File Formats
...
- . The following result files should be activated:
- stl File: results of each iteration in stl file format
- stl Files Intersected: result of each iteration intersected with the design space in stl file format
- ply Files with Stress: results with the information of stresses of each iteration (must be activated to show the results in the Visualization space)
- ply Files with Displacement: results with the information of displacements of each iteration (must be activated to show the results in the Visualization space)
- More information on result file formats here
All Inputs can be viewed and checked in the configuration file. The file should look like this.
...
The legend can be influenced using the slider. The function "Automatically set to local minimum and maximum" considers the stressesof each iteration and sets the values from the current 
iteration.
Step 8: Visualization of Displacements
...