...
- Assign a Material to each object/surface and enter the specific values for the Young's Modulus (210e3) and poisson ratio (0.28) in the Material Editor
- Activate the option design space for the relevant stl file. Only one volume can be selected as such.
- In this case: Hookdesign1
Step 3: Definition of boundary conditions
...
- Choose the design type normal
- Enter the optimization goal stress: 260 MPa
Open: Result File Formats and select "stl Files Intersected"
All Inputs can be viewed and checked in the configuration file. The file should look like this.
wrong/ no file
Step 5: Save the project
Step 6: Starting the optimization and visualizing the results
...
The legend can be influenced using the slider. The function "Automatically set to local minimum and maximum" considers the displacements of each iteration and sets the values from the 
current iteration.
You might also be interested in these tutorials:
...