Page Comparison

...

1. Geometry model for the optimization problem:
   Image RemovedImage Added
2. Creating seperate solids for the nondesign spaces:
   
   1. A separate solid must be created for each boundary condition because the boundary conditions always effect the whole volume it is referring to.
      The nondesign spaces are marked in red.
      Image AddedImage Added
      
      The design space contains the material which will be considered in the optimization as well as the nondesign spaces. This combination is necessary for the intersection function in each iteration. If the design space doesn't contain the nondesign spaces, the intersection function will remove these spaces from the result as well.Image Added
   2. The solids must be named individually.
      Image RemovedImage Added
3. Create an Assembly:
   
   1. Command SWSolidWorks: Save body.
   2. Select all bodies.
   3. Select "continue visual properties".
   4. Create Assembly: Browse.
   5. Save to the suitable folder.
      Image Added
   6. Check the box to confirm. Image Removed Choose "Ja" Image Removed
      Image Added
   7. Rebuild and save document.Image RemovedImage Removed
      Image Added
      Image Added
4. Transformation into stl files: Open assembly and save as stl