...
- The uploaded objects are listed in the objects/surfaces area
- Assign a Material to each object/surface and enter the specific values for the Young's Modulus and poisson ratio in the Material Editor
- Activate the option design space for the relevant stl file. Only one volume can be selected as such:
Step 3: Definition of boundary conditions
...
| Name | Object | Direction | Value in N |
|---|---|---|---|
| Force1 | interface1 | x | 18904 |
| Force2 | interface2 | x | 18904 |
| Force3 | interface1 | y | 17792 |
| Force4 | interface2 | y | 17792 |
| Force5 | interface1 | x y | 15701 14137 |
| Force6 | interface2 | x y | 15701 14137 |
| Force7 | interface1 | x | 19483 |
| Force8 | interface2 | x | 19483 |
| Name | Object | Direction |
|---|---|---|
Fixation1 | interface2 | x, y, z (=0) |
| Fixation2 | interface3 | x, y, z (=0) |
| Fixation3 | interface4 | x, y, z (=0) |
| Fixation4 | interface5 | x, y, z (=0) |
- A total of 8 forces and 4 fixations should have been created as a result.
...
- Active in Loadcase1: Force1, Force2, Fixation1, Fixation2, Fixation3 and Fixation4
- Active in Loadcase2: Force3, Force4, Fixation1, Fixation2, Fixation3 and Fixation4
- Active in Loadcase3: Force5, Force6, Fixation1, Fixation2, Fixation3 and Fixation4
- Active in Loadcase4: Force7, Force8, Fixation1, Fixation2, Fixation3 and Fixation4
Step 4: Definition of optimization parameters
...