...
Go to the boundary conditions tab to enter the loads and fixations. For each boundary condition a name, a space and the specification of the boundary condition is entered as follows:
| Name | Object | Direction | Value in N |
|---|---|---|---|
| Force1 | interface1 | x | 18904 |
| Force2 | interface2 | x | 18904 |
| Force3 | interface1 | y | 17792 |
| Force4 | interface2 | y | 17792 |
| Force5 | interface1 | x y | 15701 14137 |
| Force6 | interface2 | x y | 15701 14137 |
| Force7 | interface1 | x | 19483 |
| Force8 | interface2 | x | 19483 |
| Name | Object | Direction |
|---|---|---|
Fixation1 | interface2 | x, y, z (=0) |
| Fixation2 | interface3 | x, y, z (=0) |
| Fixation3 | interface4 | x, y, z (=0) |
| Fixation4 | interface5 | x, y, z (=0) |
- A total of 8 forces and 4 fixations should have been created as a result.
All boundary conditions must be assigned to the load cases. The number of load cases can be changed using the "+" or "-" characters. The assignment of the boundaries to the load cases can be made in the boundary conditions or load cases area by selecting the different boundary conditions while the load case is activated.
- Active in load case 1: Force1, Force2, Fixation1, Fixation2, Fixation3 and Fixation4
...