...
- Activate the option design space for the relevant stl file. Only one volume can be selected as such.:
Step 3: Definition of boundary conditions
Go to the boundary conditions tab to enter the loads and fixations as follows. For each boundary condition a name, a space and the specification of the boundary condition is entered as follows:
| Name | Object | Direction | Value in N |
|---|---|---|---|
| Force | Hookinterface1 | y | -20000 |
| Name | Object | Direction |
|---|---|---|
| Fixation1 | Hookborehole1 | x, y, z (=0) |
| Fixation2 | Hookinterface1 | x, y, z (=0) |
- A total of 1 force and 2 fixations should have been created as a result
...