...
- Enter a projectname and save the project.
- Open the newly created project.
Step 2: Model generation
- Upload all relevant stl files by clicking on the symbol in the objects/surfaces area
- Select all stl files
- The field at the bottom shows notifications and and makes you aware of missing input
...
- The uploaded objects are listed in the objects/surfaces area.
- Assign a Material to each object/surface and enter the specific values for the Young's Modulus and poisson ratio in the Material Editor.
- Activate the option design space for the relevant stl file. Only one volume can be selected as such.
Step 3: Definition of boundary conditions
...
- A total of 1 force and 4 fixations should have been created as a result.
All boundary conditions are assigned to the load case. The number of load cases can be changed using the "+" or "-" characters. The assignment of the boundaries to the load cases can be made in the boundary conditions or load cases area by selecting the different boundary conditions while the load case is activated.
...
- Choose the design type normal.
- Enter the optimization goal stress: 50 MPa
- Set the symmetry settings: X-Axis and Z-Axis. The X-Axis symmetry constraint is used to span a plane along the y- and z-axes in the coordinate origin.
...