...
- The uploaded objects are listed in the objects/surfaces area.
- Assign a Material to each object/surface and enter the specific values for the Young's Modulus and poisson ratio in the Material Editor.
- Activate the option design space for the relevant stl file. Only one volume can be selected as such:
Step 3: Definition of boundary conditions
...
All boundary conditions must be assigned to the load cases. The number of load cases can be changed using the "+" or "-" characters. The assignment of the boundaries to the load cases can be made in the boundary conditions or load cases area by selecting the different boundary conditions while the load case is activated.
- Active in load case 1Loadcase1: Force1, Force2, Fixation1, Fixation2, Fixation3 and Fixation4
- Active in load case 2Loadcase2: Force3, Force4, Fixation1, Fixation2, Fixation3 and Fixation4
- Active in load case 3Loadcase3: Force5, Force6, Fixation1, Fixation2, Fixation3 and Fixation4
- Active in load case 4Loadcase4: Force7, Force8, Fixation1, Fixation2, Fixation3 and Fixation4
...
- Choose the design type normal.
- Enter the optimization goal stress: 600 MPa
...