...
To use the tool, the initial Design Space, Non-Design Spaces, Retained Volumes, Excluded Volumes, Access Regions, Clearance Regions and Interfaces should be created beforehand. For the Design Space the Bounding Box Method of the Design Space Tool can be used. The Interfaces and Non-Design Spaces are created on the original part geometries and automatically referred to the corresponding surfaces of the new Design Space. The Retained and Excluded Volumes can be separate parts or solids and a different material than the Design Space material can be associated with the Retained Volume. The Access Regions can be created with the Access Region Tool as well as the Clearance Regions with the Clearance Region Tool. All relevant geometries are selected sequentially in the tool. Some geometries and their association is automatically recognized and sorted by the tool. When the selection is done, the configuration need to be created and applied to receive the Design Space for the optimisation.
...