...
The sfMesher creates automatically the volume mesh for the MSC Nastran re-analysis. In this case sfMesher failed. Please contact the support.
W5f2d8dd8
sfMesher failed with exit code << ec
The sfMesher creates automatically the volume mesh for the MSC Nastran re-analysis. In this case sfMesher failed with a known error. Please contact the support.
W62eb261b
sfMesher failed to produce expected output bdf file
The sfMesher creates automatically the volume mesh for the MSC Nastran re-analysis. In this case sfMesher failed. Please contact the support.
W6572bada
unable to compute volume mesh
The sfMesher creates automatically the volume mesh for the MSC Nastran re-analysis. In this case sfMesher failed. Please contact the support.
W6795664b
no non-designs / interfaces found - expect volume mesh generation to fail
Without defined non-designs the volume mesh cannot be successful.
W69c82e60
forces/moments do not cancel out in assembly event load case ….
Numerical stabilization is used to run the FEA without fixations. The forces & moments should cancel out for a reliable result.
W720c60fc
sfMesher failed to start
The sfMesher creates automatically the volume mesh for the MSC Nastran re-analysis. In this case sfMesher could not start. Please contact the support.
E0ab33147
tool region … refers to non-volumetric geometry
...