...
Information regarding the “Analysis Readiness” checks can be found here.
W5754bb78
GPU solver was not requested, using CPU solver only.
...
This is an information regarding the usage of GPU solving. To use GPU Solving an additional license is necessary. Please check your licenses in Options → License Manager or deactivate GPU solving in the Options → Application Settings - Generative Design Solver.
...
Time estimation has become inconsistent, expect inaccuracies.
For Restarts and Two-Stage Optimisations the time estimation is inaccurate.
...
The resolution command is higher prioritised and outweighs the Complexity input.
W25081f18
Failure criterion Von Mises is not valid. The Tensile Strength is lower or equal zero for material …
...
The chosen complexity value is too high to be calculated on this machine. A certain maximum complexity value is recommended. Have a look here.
Eb20f3415
boundary condition is missing elements
...
Make sure that the Keep Non Design function is activated. Increase the Complexity or increase the Safety Factor.
...
Please adjust the Intensity value of the Support Reduction according to the boundaries.
...
invalid supportReductionMode … expected off, passive, reactive or active.
Please set the Support Reduction Mode to one of the supported modes.
...
missing / incompatible strutDensity setting for use with support avoidance.
If you are using the Support Reduction, you need to define a Strut Density.
Eb20f33c1
LicenseConstraintException failed to acquire … count … instances of … feature.
...
RBE element lost all voxel elements. Please contact the support.
E6eb64648
build space DesignSpace_machiningCut does not exist
The Design Space could not be created. Please check the initial geometry for faults. Set the machining allowance of interfaces to a value of 0.
E6062c240
no design space(s) specified
The Design Space could not be created or is not specified in the configuration file. Please check the initial geometry for faults. Set the machining allowance of interfaces to a value of 0.
Escalations
E45ca3ab0
W45ca3ab0
...
Check the memory status of your GPU and terminate other programs that might affect the GPU memory.
W24850de8
Error Closing worker thread socket.
...