Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The already defined settings for the previous casting optimisation are kept. These define the Casting optimisation as well as two draw directions with a tapering angle of 5°. This time positive Z-direction and negative Y-direction are defined as Draw directions.

configuration.strategy=Casting

tool.tool0.draft=5
tool.tool0.direction.x=0
tool.tool0.direction.y=0
tool.tool0.direction.z=1

tool.tool1.draft=5
tool.tool1.direction.x=0
tool.tool1.direction.y=0-1
tool.tool1.direction.z=-1

...

0

Additionally, the both casting regions are added and linked to the draw directions.

toolRegion.region0.geometryName= toolRegion0

toolRegion.region0.tools.tool0

toolRegion.region1.geometryName= toolRegion1

toolRegion.region1.tools.tool1

geometry.toolRegion0.path = Solid 1.stl

geometry.toolRegion1.path = Solid 2.stl

...

Info

There is no limitation in the number of draw directions (tools) and Casting Regions (toolRegions). Several draw directions can be linked to one Casting Region.

...

These results can be imported back to MSC Apex GD (File → Import → Import GD Results).

...