...
Manufacturing Method: Generic AM
Failure Criteria: Von Mises
Safety Factor: 25
Strut Density: Medium
Shape Quality: Balanced
...
...
Step 7: Casting Design Rules via the Advanced User Settings
...
With the first command the optimisation strategy is set to Casting. The following commands defining tools. Each tool is one draw direction for the manufacturing process. The actual draw direction is set as a vector. For each draw direction a draft angle can be set. The draft angle (specified in degrees) is the tapering angle for walls/ribs regarding the Draw Directions. Specified in degreedraw directions.
In this case two draw directions are defined in positive and negative z-direction and a tapering angle of 5°.
...