...
To influence the Strut Density even further, changes of the number of iterations and number of resolution levels can be made. These settings overwrite the selection of the Strut Densityand the Shape Quality as they are only default settings for the ones described here. The table gives an overview of the default settings:
Input Commands | Explanation |
|---|---|
schedule.level.0.iterationCount = 8 schedule.level.1.iterationCount = 8 schedule.level.2.iterationCount = 8 schedule.level.3.iterationCount = 8 schedule.level.4.iterationCount = 17 schedule.level.5.iterationCount = 15 | Specify how many iterations are calculated at which resolution level. |
...
configuration.equivalenceDelta = 1e-1 configuration.attemptSoftSymmetry = dynamic configuration.softSymmetryThreshold = 0.3 |
|---|
Overhang Angle - Support Reduction
By default an overhang surface is determined if the angle falls below 45° in relation to the baseplate. This angle can be changed with the following commands.
Overhang Angle | Command |
45° |
Minimum Thickness (Experimental Function):
...