...
Three loads are created on the shown surface with the given values in the table.
Name | Force/Moment/Pressure/Gravity | Direction (depending on local coordinate system) | Value in N |
|---|---|---|---|
Force - Moment 1 | Force on faces | x | 1000 |
...
Name | Force/Moment/Pressure/Gravity | Direction (depending on local coordinate system) | Value in N |
|---|---|---|---|
Force - Moment 2 | Force on faces | x | -1000 |
...
Name | Force/Moment/Pressure/Gravity | Direction (depending on local coordinate system) | Value in N |
|---|---|---|---|
Force - Moment 3 | Force on faces | z | -1000 |
...
One Constraint on the mounting holes inner surfaces are created:
Name | Direction |
|---|---|
Constraint 1 | x, y, z (=0) |
Therefore, the Loads & Boundary Condition Tool is needed.
...
All result iterations are displayed as soon as they are available. Furthermore, you are able to stop the optimisation in this selection area. However, a Restart is not directly possible.
...
The whole MSC Apex Generative Design project with all results can be downloaded here:
| View file | ||
|---|---|---|
|
You might also be interested in these tutorials:
...