...
Adjust your model set up so that every Event has fixations in all three main directions (or local coordinate systems main direction) included.
W113a7f70
Parts of the design are not affected by any tools.
The defined Casting Regions do not cover the full Design Space.
W26473bd0
Detail specified together with either complexity or resolution - using detail for optimization
Define a detail or a complexity value in the configuration file.
W3107b018
nonCut.stl\" did not exist for tool << newTool.name
The manual defined tool does not have a defined nonCut area.
W312309f8
error computing new UFI for … voxels
Please contact the support team.
W3203a74e
unable to remove file …
Another process access a file which should be removed.
W5b6ea759
Some tools are missing regions - they will remain unused
Tools are without a casting region.
W6c9abf90
tool … is too small
Increase the Rounding Radius for casting.
We8be37f1
Smoothing failed, mesh was not changed
The integrated smoothing algorithm failed. Please contact the support team.
E0ab33147
tool region … refers to non-volumetric geometry
The defined casting region is not a solid body / closed manifold geometry.
E133413c8
No casting/milling tools are loaded
Reconsider/check the manual defined tools.
E133413c9
No casting/milling tools are loaded
Reconsider/check the manual defined tools.
E53eeff00
feature … is unavailable
The license cannot be check out. Please check you license.
E54c591e8
supportReductionMode is not supported for BallStrategy
The Support Reduction function is currently not available. It will return shortly redesigned and improved.
E7f716c48
This Error is only produced after another Error was encountered. The optimisation algorithm tried to continue despite the previous Error but could not continue. The optimisation fails with this Error although the primary Error is the reason for the terminated optimisation.
...
This may occur if an optimisation is started with Advanced User Settings with which only 1 or 2 iterations should be calculated. If this is the case please add the following Advanced User Settings commands:
schedule.level.3.subiterations.~.outputMode.OutputGeneratedSurface |
E39d2c328
unexpected error loading file statistics.csv: Unable to open input file
This may occur if an optimisation is started with Advanced User Settings with which only 1 or 2 iterations should be calculated. How to resolve this here.
schedule.level.3.subiterations.~.outputMode.OutputGeneratedSurface |
E58799450
unexpected error writing file file_name.ply:
One of the result files cannot be written. This can happen while using parallelization (default). This can be resolved by adding following Advanced User Settings commands:
process.workers = 1 |
E724493a8
Unable to open file … for writing
...