...
Interfaces have to be created for every functional surface - so every surface where a boundary condition is applied to. With this Tool an offset to the inside with the input “Non-Design Space Thickness” and an offset to the outside with the input “Machining Allowance” is created. The Offset Distance is expanding the Interface to the set value to create material on front faces.
...
The optimisation parameters are selected in the Studies Area as well.
Now the Build Direction will be adjusted. Therefore the Build Direction Tool can be activated with the coordinate system symbol and any surface can be selected. To rotate the Build Direction either the visualized coordinate system can directly be manipulated to align the Build Direction with the x-Axis of the model or the Euler Angles can be entered directly (90,00 °; 90,00 °; 270,00 °).
For each scenario the Build Direction can be easily changed, then the Build Direction for the Design Rules as well the material properties are rotated accordingly. This way multiple Build Directions can be checked in one project. Afterwards the optimisation results can be compared in the Post Processing and the best build orientation can be picked
...
You can check the status of the optimisation in the GD Status and get more information on Warning and Error messages. This can be done directly in the Post-Processing as well as in the Studies tab for an optimisation that has already been executed.
...
All result iterations are displayed as soon as they are available. Furthermore, you are able to stop the optimisation in this selection area. However, a Restart is not directly possible.
...