...
In the live Post Processing, the iterations of the optimisation are displayed as soon as they are available. The current iteration is shown and the number is displayed at the bottom progress bar. Furthermore, the progress bar shows the planned number of iterations. The Design Space can be displayed by selecting the button Initial Shape beneath the progress bar. The optimisation can be aborted by selecting the stop button next to the scenario in the left top corner. After finishing or aborting the optimisation the Post Process can be left with the exit button in the right bottom corner.
...
The Failure Criterion can be chosen in the studies tab for every optimisation scenario. Dependent on the intention of the optimisation it can be chosen between the equivalent von Mises Stress, a FFF Thumb Rule or directional dependent Tsai-Hill or Tsai-Wu Failure Criteria. More information regarding the Failure Criteria here.
In combination with the Safety Factor and the material properties (material limits) the Failure Criterion is the objective of the optimisation. The target is to load all the material with a value of 1 of the chosen Failure Criterion.
...
If the Smooth-Geometry is transferred as a Facet-Geometry, the CAD-Retransitioning can be done manually.
...
Build Direction
The Build Direction of the Principal Coordinate System (PCS) can be visualised. Thus, several optimisation scenarios with different build directions can compared in the Post Processing.
...