Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Info

Goal of this tutorial

  • Learn how different material properties & failure criteria influence the design

  • Usage of isotropic, transversely isotropic and orthotropic material behaviour

  • Usage of von Mises, FFF Thumb Rule and directional dependent Tsai Wu failure criteria

  • Set up different optimisations to exploit the full potential of Generative Design

Project Data

Training:

Relevant data for this tutorial:

...

  • Event1: Force-Moment 1, Constraint 1

...

Step 6: Definition of optimisation parameters and Generative Design Settings

The optimisation parameters are selected in the Studies Area as well.

Now the Build Direction will be adjusted. Therefore the Build Direction Tool can be activated with the coordinate system symbol and any surface can be selected. To rotate the Build Direction either the visualized coordinate system can directly be manipulated to align the Build Direction with the x-Axis of the model or the Euler Angles can be entered directly (90,00 °; 90,00 °; 270,00 °).

For each scenario the Build Direction can be easily changed, then the Build Direction for the Design Rules as well the material properties are rotated accordingly. This way multiple Build Directions can be checked in one project. Afterwards the optimisation results can be compared in the Post Processing and the best build orientation can be picked

...

...