...
Create the material in the Materials editor and assign it to the Design Spaceand Retained Volume. It is possible to create a separate material for the Retained Volume. In this case the material behaviour is Isotropic.
The specific values needed are the Young's Modulus (72000 MPa), Poisson ratio (0.34) and Density (2.7e-6 kg/mm3).
The Tension Strength is the maximum allowable stress for the material and is set to 460 MPa.
...
Inside the Post Processing the von Mises stress and the displacements are visible for all iterations and for every Event. The Scale can be influenced individually
...
The whole MSC Apex Generative Design project with all results can be downloaded here:
| View file | ||
|---|---|---|
|