...
You can either create the geometry directly in MSC Apex Generative Design or import already existing files. You can import for example .xb, .xt, .step, and .sldprt files into the program.
...
Create the material in the Materials editor and assign it to the Design Space
Assuming the part should be printed with a Manufacturing Method like FFF, a Transversely Isotropic material is applied.
The specific values needed are the Young's Modulus in build direction (1700 MPa) and in in-plane direction (1900 MPa), the Shear Modulus (730 MPa) and the Poisson ratio (0.3) for xy and (0.39) for yz. The density is set to 0.9e-6 kg/mm3.
As the last input the material limits should be entered. Which of these are required depends on the optimisation intention and the chosen Failure Criterion. In this case we want to take advantage of the directional dependent material limits as well as different limits for tension and compression (directional dependent Tsai-Wu).
These values are optional, if a different Failure Criterion is selected, less material input is required
...