| View file | ||
|---|---|---|
|
...
Four Interfaces are created on the interfaces between the Design Space and the Motor. Hide the Motor as well as the screws to have a better view. A Non-Design Space Thickness and of 4 mm, an Offset Distance of 3 6 mm and a Machining Allowance of 1 mm is entered. Now select the surface and confirm the selection (MMB).
...
Manufacturing Method: Generic AM
Failure Criteria: Von Mises
Safety Factor: 43
Select the Strut Density: MediumDense
Select the Shape Quality: Balanced
Set the Complexity Setting: 144
...
Don’t forget to save the project!
...
If all data is correct, the optimisation can be started and tracked in the Post Processing. The Analysis Readiness function checks if all information is provided and the optimisation can be started.
...
You can check the status of the optimisation in the GD Status and get more information on Warning and Error messages. This can be done directly in the Post - Processing as well as in the Studies tab for an optimisation that has already run.
...
The whole MSC Apex Generative Design project project with all results can be downloaded here:
| View file | ||
|---|---|---|
|