...
Import/create the Design Space including the Non-Design Spaces in MSC Apex Generative Design as one solid. For this Jet Engine Bracket the already prepared Design Space was imported.
Open the Optimization Tools to select the imported Geometry as the Design Space
...
Create the material Steel Titanium in the Materials editor and assign it to the Design Space. In this case the material behaviour is Isotropic.
The specific values needed are the Young's Modulus (116e3 MPa), Poisson ratio (0.26) and Density (4.48e-6 kg/mm3).
The Tension Strength is the maximum allowable stress for the material and is set to 1290 MPa.
...