Versions Compared

Version Old Version 3 New Version 4
Changes made by

Anne Duechting-Rotsch

Anne Duechting-Rotsch

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

Goal of this tutorial

  • Get to know the optimisation model setup with symmetry constraint

...

Interfaces have to be created for every functional surface - so every surface where a boundary condition is applied to. With this Tool an offset to the inside with the input “Interface Thickness”(Non“Non-Design Space ) Thickness” and an offset to the outside with the input “Machining Allowance” is created. The Offset Distance is expanding the Interface to the set value to create material on front faces.

  • One Interface is created on the same surface the force is applied to. Therefore, an Interface Non-Design Space Thickness of 1 mm and a Machining Allowance of 1 mm is entered. Now select the surface and confirm the selection (MMB)

  • One Interface is created on all surfaces of the fixation Non-Design Space. Therefore, an Interface Non-Design Space Thickness of 1mm and a Machining Allowance of 1mm is entered. Now select the surfaces and confirm the selection (MMB).

...