Updates regarding the material values coming soon!
This is a composition from different material data sheets and only suggestions for material properties. MSC Apex Generative Design needs the Young's modulus, the Poisson ratio and the Density as an input.
...
Metals (Selective Laser Melting)
Name | DIN | Density [kg/m^3] | Young’s Modulus [MPa] | Poisson Ratio | Yield Strength [MPa] | Tensile Strength [MPa] | Source |
|---|---|---|---|---|---|---|---|
316L Stainless Steel | 1.4404 | 7966 | 192372 (@20°C) | 0.3 | 547 | 676 | Renishaw Data Sheet |
PH1 Stainless Steel | 1.4540 | 7780 | 200000 (@20°C) | 0.272 | 1050 | 1050 | EOS Data Sheet |
IN-718 Nickel Alloy | 2.4668 | 8150 | 190000 (@20°C) | 0.3 | 758 | 1040 | Renishaw Data Sheet |
CoCr CobaltChrome Alloy | 2.4723 | 8300 | 190000 (@20°C) | 0.3 | 1060 | 1350 | EOS Data Sheet |
IN-625 Nickel Alloy | 2.4856 | 8440 | 207001 (@21°C) | 0.278 | 725 | 990 | EOS Data Sheet |
AlSi10Mg Aluminum Alloy | 3.2381 | 2700 | 72000 (@50°C) | 0.34 | 240 | 460 | Haynes Data Sheet |
TiAl6V4 Titanium Alloy | 3.7165 | 4481.87 | 115617 (@25°C) | 0.26 | 1140 | 1290 | EOS Data Sheet |
Polymers
Name | Additive Manufacturing process | Density [kg/m^3] | Young's modulus [MPa] | Poisson ratio* | Yield strength [MPa] | Tensile strength [MPa] | Source |
|---|---|---|---|---|---|---|---|
PA12 | Selective Laser Sintering (SLS) | 900 | 1700 | 0.39 |
| 45 | EOS Data Sheet |
PP | Selective Laser Sintering (SLS) | 895 | 1200 | 0.43 |
| 27 | EOS Data Sheet |
Alumide | Selective Laser Sintering (SLS) | 1360 | 3800 | 0.4 |
| 48 | EOS Data Sheet |
PLA | Fused Deposition Modeling (FDM) | 1010 | 3039-2539 | 0.43 | 45-26 | 48-26 | Stratasys Data Sheet |
ABS | Fused Deposition Modeling (FDM) | 1050 | 1627 | 0.35 |
| 22 | Materialise Data Sheet |
Ultem 9085 | Fused Deposition Modeling (FDM) | 1340 | 2220 | 0.35 |
| 72 | Materialise Data Sheet |
PA12 | Multi Jet Fusion (MJF) | 1010 | 1700 | 0.38 |
| 48 | Materialise Data Sheet |
EPX82 | Digital Light Synthesis (DLS) | 1155 | 2800 | 0.4 |
| 82 | Carbon Data Sheet |
CE221 | Digital Light Synthesis (DLS) | 1210 | 3870 | 0.42 |
| 92 | Carbon Data Sheet |
Example Materials for 3D Transversely Isotropic and 3D Orthotropic
Name | Density [kg/m^3] | Youngs Modulus (Ex,Ey,Ez) [MPa] | Shear Modulus (Gxy,Gyz,Gzx) [MPa] | Poisson’s ratio (NUxy, NUyz, NUzx) | Tension Strength (Axis, In Plane) [MPa] | Compression Strength (Axis, In Plane) [MPa] | Transversely Shear Strength [MPa] |
|---|---|---|---|---|---|---|---|
FFF Transverseley Isotropic | 900 | 1700, 1900 | 730 | 0.3, 0.3 | 48, 62 | 96, 124 | 50 |
FFF Orthotropic | 900 | 1700, 1900, 1900 | 730, 685, 730 | 0.3, 0.39, 0.335 | 48, 62 | 96, 124 | 50 |
*values aren't from the listed source but are without a specific one. Please check the material data at hand to find the suited value for your specific material.
...