Link, Images, Projects
| Info |
|---|
Goal of this tutorial
|
...
Under Displacement Constraints a “clamped” constraint can be chosen, which locks translations in all three directions. On the left side of the Tool the relevant geometry choice can be selected. In this case cells the inner surfaces of the Non-Design Spaces are selected to attach the constraints on the Non-Design Spaces.
...
Step 4: Definition of load cases
...
Select the Strut Density: Medium
Select the Shape Quality: Balanced
Choose the Complexity: 6 GB (you can start with a lower value to receive fast results)20
Enter theStress Goal: 80 MPa
...
Don’t forget to save the project!
...
Adding Advanced User Settings
If on all functional surfaces a Machining Allowance is applied, with the Advances User Settings the automatic growth of Non-Design Spaces can be deactivated. The automatic growth of Nondesign-Spaces is activated as the default in case that no Machining Allowances are applied. The autmotic groth of Nondesign-Spaces can sometimes lead to some issues. More information here.
...
Generative Design
You can always change the Strut Density, Stress Goal and Complexity to influence the results and try out different options.
...